flame arrester flange and hood

TP4200M H Series Flame Arresters/ Flange and Hood are typically used on atmospheric tanks which contain volatile liquids.

INTRODUCTION  As will all AKTEK products, every Model TP4200M Series is factory inspected to meet all critical requirements and special needs. Inventory is maintainer to ensure rapid delivery.

EMERGENCY RELIEF VENT

Model TP4200M Series are designed to inhibit flame propagation in gas piping systems and to protect low pressure tanks containing flammable liquids from externally caused sources of heat and ignition. This provides increased fire protection and safety.
SPECIAL FEATURE                                                   
Model TP4200M Series are built of corrosion resistant materials throughout. Wafer design construction affords easy accessibilty  to the flame bank. Additionally, jack screws aid in the removal from the shell assembly. All Aktek flame arrester flame banks utilize spiral wound, crimped ribbon constructed flame elements. These proven, Factory Mutual approved elements have been reported, by NTIS of the Dept. of Commerce, to provide the best flame quenching performance for the least pressure drop. Aktek’s special recessed flame bank seating construction uniqueyly provides an extra measure of protection against leakage and possible flame propagation.
Size Code 02 03 04 06 08 10 12
Nominal Pipe Size 2” 3” 4” 6” 8” 10” 12”
A Hood Diameter 265 330 490 575 625 625 650
B Max. Height 460 510 525 595 635 715 790
C Flange Inside
D Bolt Circle Diameter
E Flange Outside        
F Flange Thickness      
G Hole Diameter        
H Number Of Holes            

TECHNICAL DATA
•     Sizes 2’’ through 60’’
•     Available in Carbon steel, Stainless steel aluminum and other materials
•     Water design for quick and easy maintenance.
•     Unique recessed seating for superios protection
•     Factory Mutual approval for most sizes and materials
•     Proven spiral wound, crimped ribbon, flame element

AKTEK, THE CAPABILITY COMPANY
As with all Aktek products, every Flame Arrester is factory inspected and tested to meet all critical reguirements and special  needs. Inventory is maintanied to ensure rapid deliver

 

flame arrester flange and hood

MATERIAL LIST
ITEM DESCRIPTION CONSTRUCTION OPTIONAL FEATURE
ALUMINUM CARBON STL 316 SS ……………
1 BODY AL GR 356 T6 CS WCB CF-8M(316 SS)
2 SEAT AL GR 356 T6 CS WCB CF-8M(316 SS)
3 BUSH Teflon® FED Teflon® FED Teflon® FED
4 ARRESTER ELEMENT SS SS SS
5 BOLT SS SS SS
6 NUT SS SS SS
7 CAP NUT Teflon® FED Teflon® FED Teflon® FED
8 HOOD ALUMINUM CS 316 SS
9 SCREEN, PRESSURE 316 SS 316 SS 316 SS
10 GUIDE SS SS SS
11 WASHER SS SS SS
12 NUT SS SS SS