TP8100M Series Flame Arresters are typically used on atmospheric tanks which contain volatile liquids.
INTRODUCTION As will all AKTEK products, every Model TP8100M Series is factory inspected to meet all critical requirements and special needs. Inventory is maintainer to ensure rapid delivery.
EMERGENCY RELIEF VENT
Model TP8100M Series are built of corrosion resistant materials throughout. Wafer design construction affords easy accessibilty to the flame bank. Additionally, jack screws aid in the removal from the shell assembly. All Aktek flame arrester flame banks utilize spiral wound, crimped ribbon constructed flame elements. These proven, Factory Mutual approved elements have been reported, by NTIS of the Dept. of Commerce, to provide the best flame quenching performance for the least pressure drop. Aktek’s special recessed flame bank seating construction uniqueyly provides an extra measure of protection against leakage and possible flame propagation.
|Nominal Pipe Size||2”||3”||4”||6”||8”||10”||12”|
|C||Flange In Diameter||102|
|D||Bolt Circle Diameter||191|
|E||Flange Out Diameter||230|
|H||Number Of Holes||8|
• Sizes 2’’ through 60’’
• Available in Carbon steel, Stainless steel aluminum(type 365) and other materials
• Water design for quick and easy maintenance.
• Unique recessed seating for superios protection
• Factory Mutual approval for most sizes and materials
• Proven spiral wound, crimped ribbon, flame element
AKTEK, THE CAPABILITY COMPANY
As with all Aktek products, every Flame Arrester is factory inspected and tested to meet all critical reguirements and special needs. Inventory is maintanied to ensure rapid delivery
|ALUMINUM||CARBON STL||316 SS||……………|
|1||BODY||AL GR 356 T6||CS WCB||CF-8M(316 SS)|
|2||BUSH||Teflon® FED||Teflon® FED||Teflon® FED|