aktek horizontal flame arrester

TP8300M Series Horizontal Flame Arresters are typically used on atmospheric tanks which contain volatile liquids.

INTRODUCTION  As will all AKTEK products, every Model TP8300M Series is factory inspected to meet all critical requirements and special needs. Inventory is maintainer to ensure rapid delivery.

EMERGENCY RELIEF VENT

Model TP8300M Series are designed to inbihit flame propagation in gas piping systems and to protect low pressure tanks containing flammable liguids. Arresters protect low flash point liguids from externally  caused sources of heat and ignition.This provides increased fire protection and safety.
SPECIAL FEATURE                                                   
Model TP8300M Series are built of corrosion resistant materials throughout. Wafer design construction affords easy accessibilty  to the flame bank. Additionally, jack screws aid in the removal from the shell assembly. All Aktek flame arrester flame banks utilize spiral wound, crimped ribbon constructed flame elements. These proven, Factory Mutual approved elements have been reported, by NTIS of the Dept. of Commerce, to provide the best flame quenching performance for the least pressure drop. Aktek’s special recessed flame bank seating construction uniqueyly provides an extra measure of protection against leakage and possible flame propagation.
Size Code 02 03 04 06 08 10 12
Nominal Pipe Size 2” 3” 4” 6” 8” 10” 12”
A Max. 240 300 380 480 590 650 830
B Max. Height 345 430 539 648 751 877 1050
C Flange In Diameter 102
D Bolt Circle Diameter 191
E Flange Out Diameter   230      
F Flange Diameter   24    
G Hole Diameter   20      
H Number Of Holes     8        

TECHNICAL DATA
•     Sizes 2’’ through 60’’
•     Available in Carbon steel, Stainless steel aluminum(type 356) and other materials
•     Water design for quick and easy maintenance.
•     Unique recessed seating for superios protection
•     Factory Mutual approval for most sizes and materials
•     Proven spiral wound, crimped ribbon, flame element

AKTEK, THE CAPABILITY COMPANY
As with all Aktek  products, every Flame Arreste is factory inspected and tested to meet all critical reguirements and special  needs. Inventory is maintanied to ensure rapid delivery

MATERIAL LIST
ITEM DESCRIPTION CONSTRUCTION OPTIONAL FEATURE
ALUMINUM CARBON STL 316 SS ……………
1 BODY AL GR 356 T6 CS WCB CF-8M(316 SS)
2 BUSH Teflon® FED Teflon® FED Teflon® FED
3 ARRESTER ELEMENT SS SS SS
4 BOLT SS SS SS
5 NUT SS SS SS
6 CUP NUT Teflon® FED Teflon® FED Teflon® FED
7 INLET CS ALUMINUM 316 SS
8 STUD SS SS SS
9 WASHER SS SS SS
10 NUT SS SS SS

aktek horizontal flame arrester aktek horizontal flame arrester aktek horizontal flame arrester