aktek vertical flame arresters

TP8500M Series Vertical Flame Arresters are typically used on atmospheric tanks which contain volatile liquids.

INTRODUCTION  As will all AKTEK products, every Model TP8500M Series is factory inspected to meet all critical requirements and special needs. Inventory is maintainer to ensure rapid delivery.

FLAME ARRESTERS

Model TP8500M Series are designed to inhibit flame propagation in gas piping systems and to protect low pressure tanks containing flammable liquids .Arresters protect low flash point liguids from externally caused sources of heat and ignition. This provides increased fire protection and safety.
SPECIAL FEATURE                                                   
Model TP8500M Series are built of corrosion resistant materials throughout. Wafer design construction affords easy accessibilty  to the flame bank. Additionally, jack screws aid in the removal from the shell assembly. All Aktek flame arrester flame banks utilize spiral wound, crimped ribbon constructed flame elements. These proven, Factory Mutual approved elements have been reported, by NTIS of the Dept. of Commerce, to provide the best flame quenching performance for the least pressure drop. Aktek’s special recessed flame bank seating construction uniqueyly provides an extra measure of protection against leakage and possible flame propagation.
aktek vertical flame arresters
Size Code 02 03 04 06 08 10 12
Nominal Pipe Size 2” 3” 4” 6” 8” 10” 12”
A Hood Diameter 265 330 490 575 625 665 670
B Max. Height 500 650 889 1023 1126 1277 1445
C Flange In Diameter
D Bolt Circle Diameter
E Flange Out Diameter        
F Flange Diameter      
G Hole Diameter        
H Number Of Holes            

TECHNICAL DATA
•     Sizes 2’’ through 60’’
•     Available in Carbon steel, Stainless steel aluminum(type 365) and other materials
•     Water design for quick and easy maintenance.
•     Unique recessed seating for superios protection
•     Factory Mutual approval for most sizes and materials
•     Proven spiral wound, crimped ribbon, flame element

AKTEK, THE CAPABILITY COMPANY
As with all Aktek  products, every Flame Arrester is factory inspected and tested to meet all critical reguirements and special  needs. Inventory is maintanied to ensure rapid delivery

aktek vertical flame arresters

MATERIAL LIST
ITEM DESCRIPTION CONSTRUCTION OPTIONAL FEATURE
ALUMINUM CARBON STL 316 SS ……………
1 BODY AL GR 356 T6 CS WCB CF-8M(316 SS)
2 BUSH Teflon® FED Teflon® FED Teflon® FED
3 ARRESTER ELEMENT SS SS SS
4 BOLT SS SS SS
5 NUT SS SS SS
6 CAP NUT SS SS SS
7 SEAT Teflon® FED Teflon® FED Teflon® FED
8 INLET CS ALUMINUM 316 SS
9 GUIDE ALUMINUM CS 316 SS
10 WASHER SS SS SS
11 NUT SS SS SS
12 HOOD ALUMINUM CS 316 SS
13 SCREEN, PRESSURE 316 SS 316 SS 316 SS
14 GUIDE, PRESSURE ALUMINUM CS 316 SS
15 WASHER SS SS SS
16 NUT SS SS SS

aktek vertical flame arresters aktek vertical flame arresters aktek vertical flame arresters