ateco roof drain float check valve

TP8700M Series Flame Arresters/Emergency Vent  are typically used on atmospheric tanks which contain volatile liquids.

INTRODUCTION  As will all AKTEK products, every Model TP8700M Series is factory İnspected to meet all critical requirements and special needs. Inventory is maintainer to ensure rapid delivery.

EMERGENCY RELIEF VENT

Model TP8700M Series are designed to inhibit flame propagation in gas piping systems and to protect low pressure tanks containing flammable liquids .Arresters protect low flash point liguids from externally caused sources of heat and ignition. This provides increased fire protection and safety.
SPECIAL FEATURE                                                   
Model TP8700M Series are built of corrosion resistant materials throughout. Wafer design construction affords easy accessibilty  to the flame bank. Additionally, jack screws aid in the removal from the shell assembly. All Aktek flame arrester flame banks utilize spiral wound, crimped ribbon constructed flame elements. These proven, Factory Mutual approved elements have been reported, by NTIS of the Dept. of Commerce, to provide the best flame quenching performance for the least pressure drop. Aktek’s special recessed flame bank seating construction uniqueyly provides an extra measure of protection against leakage and possible flame propagation.
Size Code 02 03 04 06 08 10 12
Nominal Pipe Size 2” 3” 4” 6” 8” 10” 12”
A Hood Dimension 250 315 424 494 583 670 800
B Max. Height 475 615 779 888 995 1127 1370
C Flange Inside
D Bolt Circle Diameter
E Flange Outside        
F Flange Thickness      
G Hole Diameter        
H Number Of Holes            

TECHNICAL DATA
•     Sizes 2’’ through 60’’
•     Available in Carbon steel, Stainless steel aluminum (type 356) and other materials
•     Water design for quick and easy maintenance.
•     Unique recessed seating for superios protection
•     Factory Mutual approval for most sizes and materials
•     Proven spiral wound, crimped ribbon, flame element

AKTEK, THE CAPABILITY COMPANY
As with all Aktek  products, every Flame Arrester is factory inspected and tested to meet all critical reguirements and special  needs. Inventory is maintanied to ensure rapid delivery

pressure vacuum valve

MATERIAL LIST
ITEM DESCRIPTION CONSTRUCTION OPTIONAL FEATURE
ALUMINUM CARBON STL 316 SS ……………
1 BODY AL GR 356 T6 CS WCB CF-8M(316 SS)
2 BUSH Teflon® FED Teflon® FED Teflon® FED
3 ARRESTER ELEMENT SS SS SS
4 BOLT SS SS SS
5 NUT SS SS SS
6 CAP NUT SS SS SS
7 SEAT AL GR 356 T6 CS WCB CF-8M(316 SS)
8 STUD SS SS SS
9 WASHER, LOCK SS SS SS
10 NUT SS SS SS
11 COVER AL GR 356 T6 CS WCB CF-8M(316 SS)
12 FOOT PEDAL AL GR 356 T6 CS WCB CF-8M(316 SS)
13 DIAPHRAGM Teflon® FED Teflon® FED Teflon® FED
14 BOLT SS SS SS
15 WASHER, LOCK SS SS SS
16 PIN SS SS SS
17 RING SS SS SS
18 INLET CS ALUMINUM 316 SS
19 GUIDE, PRESSURE ALUMINUM CS 316 SS
20 WASHER SS SS SS
21 NUT SS SS SS