ateco roof drain float check valve

TP8800M Series Flame Arresters / Pressure Vent are typically used on atmospheric tanks which contain volatile liquids.

INTRODUCTION  As will all AKTEK products, every Model TP8800M Series is factory  inspected to meed all critical requirements and special needs. Inventory is maintainer to insure rapid delivery.

EMERGENCY RELIEF VENT

Model TP8800M Series are designed to inhibit flame propagation in gas piping systems and to protect low pressure tanks containing flammable liquids .Arresters protect low flash point liguids from externally caused sources of heat and ignition. This provides increased fire protection and safety.
SPECIAL FEATURE                                                   
Model TP8800M Series are built of corrosion resistant materials throughout. Wafer design construction affords easy accessibilty  to the flame bank. Additionally, jack screws aid in the removal from the shell assembly. All Aktek flame arrester flame banks utilize spiral wound, crimped ribbon constructed flame elements. These proven, Factory Mutual approved elements have been reported, by NTIS of the Dept. of Commerce, to provide the best flame quenching performance for the least pressure drop. Aktek’s special recessed flame bank seating construction uniqueyly provides an extra measure of protection against leakage and possible flame propagation.
Size Code 02 03 04 06 08 10 12
Nominal Pipe Size 2” 3” 4” 6” 8” 10” 12”
A Max. Widht 265 330 410 490 575 625 650
B Max. Height 570 710 907 920 1238 1364 1550
C Flange Inside
D Bolt Circle Diameter
E Flange Outside        
F Flange Thickness      
G Hole Diameter        
H Number Of Holes            

TECHNICAL DATA
•     Sizes 2’’ through 60’’
•     Available in Carbon steel, Stainless steel aluminum (type 356) and other materials
•     Water design for quick and easy maintenance.
•     Unique recessed seating for superios protection
•     Factory Mutual approval for most sizes and materials
•     Proven spiral wound, crimped ribbon, flame element

AKTEK, THE CAPABILITY COMPANY
As with all Aktek  products, every Flame Arrester is factory inspected and tested to meet all critical reguirements and special  needs. Inventory is maintanied to ensure rapid delivery

pressure vacuum valve

MATERIAL LIST
ITEM DESCRIPTION CONSTRUCTION OPTIONAL FEATURE
ALUMINUM CARBON STL 316 SS ……………
1 BODY AL GR 356 T6 CS WCB CF-8M(316 SS)
2 BUSH Teflon® FED Teflon® FED Teflon® FED
3 ARRESTER ELEMENT SS SS SS
4 BOLT SS SS SS
5 NUT SS SS SS
6 CAP NUT SS SS SS
7 SEAT AL GR 356 T6 CS WCB CF-8M(316 SS)
8 FLANGE AL GR 356 T6 CS WCB CF-8M(316 SS)
9 BUSH Teflon® FED Teflon® FED Teflon® FED
10 INLET CS ALUMINUM 316 SS
11 GUIDE ALUMINUM CS 316 SS
12 WASHER SS SS SS
13 NUT SS SS SS
14 RING SS SS SS
15 STEM SS SS SS
16 DIAPHRAGM, PRESSURE Teflon® FED Teflon® FED Teflon® FED
17 BACKING, PRESSURE Teflon® FED Teflon® FED Teflon® FED
18 PALLET, PRESSURE AL GR 356 T6 CS WCB CF-8M(316 SS)
19 WASHER, LOCK Teflon® FED Teflon® FED Teflon® FED
20 HOOD ALUMINUM CS 316 SS
21 SCREEEN, PRESSURE 316 SS 316 SS 316 SS
22 GUIDE, PRESSURE ALUMINUM CS 316 SS
23 WASHER SS SS SS
24 NUT SS SS SS
25 WASHER SS SS SS
26 STEM GUIDE ALUMINUM CS 316 SS
27 BOLT SS SS SS
28 WASHER SS SS SS
29 NUT SS SS SS