TP9100M Series Flame checks are typically used on atmospheric tanks which contain volatile liquids. INTRODUCTIONAs will all AKTEK products, every Model TP9100M Series is factory inspected to meet all critical requirements and special needs.Inventory is maintainer to ensure rapid delivery.
Model TP9100M is designed to prevent flashback in small lines carrying flammable gases. They are often used in small pilotlines. The Flame checks are union type fittings with FNPT connections.
The Model 7622 flame element consist of perforated plate with sufficient openings to provide a minimum pressure drop and still prevent flash back in the line. The construction permits easy access for inspection and maintenance.
|Nominal Pipe Size||2”||3”||4”||6”||8”||10”||12”|
|C||Flange In Diameter||154|
|D||Bolt Circle Diameter||241|
|E||Flange Out Diameter||280|
|H||Number Of Holes||8|
• Sizes 1/2’’ through 1 1/2’’
• Pressure setting ½oz/in2 to 15 PSIG
• Available in housing of malleable iron carbon steel and stainless steel with element(perforated plates) of stain
• Designed for easy maintenance
AKTEK, THE CAPABILITY COMPANY
As with As with all Aktek products, every Model TP9100M is factory inspected and tested to meet your critical requirements and special needs. Inventory is maintained to insure rapid delivery.
|ALUMINUM||CARBON STL||316 SS||……………|
|1||BASE||AL GR 356 T6||CS WCB||CF-8M(316 SS)|
|2||DIAPHRAGM||Teflon® FED||Teflon® FED||Teflon® FED|
|3||COVER||AL GR 356 T6||CS WCB||CF-8M(316 SS)|
|4||ARM||AL GR 356 T6||CS WCB||CF-8M(316 SS)|
|7||ROLL PIN||316 SS||316 SS||316 SS|