ateco roof drain float check valve

TP2100M Series Pressure Relief Vents Pıpe Away  are typically used on atmospheric tanks which contain volatile liquids.

INTRODUCTION  As will all AKTEK products, every Model TP2100M Series is factory inspected to meed all critical requirements and special needs.  Inventory is maintainer to ensure rapid delivery.

PRESSURE RELIEF VENT
Model TP2100M Series are for use where pressure relief is required and all relieving vapors must be piped away. Tank relief, to avoid tank damage, is controlled by a spring or weight loaded palet in the valve hausing. Pressure relief vent help provide increased fire protection and safety. The model TP2100M can also be used for in-line vacuum relief where flanged inlet connection is required. Back pressure in the system must be considered when using flow curves.
SPECIAL FEATURE                                                   
Model TP2100M offers Aktek’s special ‘’cushioned air’’ seating. Superior performing Teflon® seating diaphragms are standart to minimize sticking caused  by resinous vapors and atmosphorec moisture. The Model TP2100M has a self-draining hausing body and drip rings to protect seating surfaces from condensate and freezing. This design also avoids pressure or vacuum buildup due to binding or clogging of the valve. Buna-N, Viton® and other seating diaphragms can be provided when required.

Size Code 02 03 04 06 08 10 12
Nominal Pipe Size 2” 3” 4” 6” 8” 10” 12”
A Pipe Height 245 295 364 455 515 585 600
B Max. Height 300 350 410 490 575 625 625
C Flange Inside
D Bolt Circle Diameter
E Flange Outside            
F Flange Thickness          
G Hole Diameter            
H Number Of Holes            

TECHNICAL DATA
•   Sizes 2’’ through 12’’
•   Pressure setting ½oz/in2 to 15 PSIG
•   Available in aluminum (type 356)carbon steel, Stainles steel and other materials.
•   Modular construction

AKTEK, THE CAPABILITY COMPANY
As with all Aktek  products, every Model 2100B is factory inspected and tested to meet your critical reguirements and special  needs. Inventory is maintanied to ensure rapid delivery

pressure vacuum valve

MATERIAL LIST
ITEM DESCRIPTION CONSTRUCTION OPTIONAL FEATURE
ALUMINUM CARBON STL 316 SS ……………
1 BODY AL GR 356 T6 CS WCB CF-8M(316 SS)
2 SEAT AL GR 356 T6 CS WCB CF-8M(316 SS)
3 BUSH Teflon® FED Teflon® FED Teflon® FED
4 PIPE AWAY AL GR 356 T6 CS WCB CF-8M(316 SS)
5 BOLT SS SS SS
6 RING SS SS SS
7 STEM 316 SS 316 SS 316 SS
8 DIAPHRAGM Teflon® FED Teflon® FED Teflon® FED
9 BACKING Teflon® FED Teflon® FED Teflon® FED
10 PALLET AL GR 356 T6 CS WCB CF-8M(316 SS)
11 WASHER SS SS SS
12 STEM GUIDE ALUMINUM CS 316 SS
13 STUD SS SS SS
14 CAPNUT SS SS SS